I know I should be used to it by now (after all I see it happens all the time in University and in the design industry) but it still amazes me that I can print designs into reality that only exist on a computer. Anyway, I managed to push out a rough print overnight to…
Tag: design
Isolator carriage v2
Have made some changes to v1 design of the isolator carriage. A bit more cable management and some amendments to the BMS to ensure the charge input cables are orriended correctly, etc. Need to print the design to double check it maybe get some advise of the management of the cables. Currently the high and…
300mm cuts
Have started to think about the opportunity to 3D print panels rather than metal form them. The more I think about it the more it makes sense. Plastic doesn’t conduct electricity, useful trait on an electric bike… and the production will be easier for my CAD skillset. Having had the printer for a while I…
Rear battery box cover v2
I have spent an evening making some changes to the design of the original battery box to give better clearance for the cables I originally planned to through the bottom of the box because that is where the BMS used to be but now that it is better placed above the battery amendments need to…
Step back and see…
Great light today, thought it word be a good opportunity to take a step back and have a look at the old bike to observe it from a distance. Being stuck in the garage I’m often working up close and never get to see how it looks from a ‘normal’ street level perspective. Social media…
Brake lines
How long should the brake lines be? As long as a piece of string! Planning the final dimensions for the brake lines. Measurements have been taken with a cord. The factory lines at the front (1 x 310mm upper / 2 x 495mm lower) do not need to be changed. However the rear line is…
Lights behind
The 3D print is delivered, LED strip installed and bolted to the frame. Works well, slightly worried about the suspension travel now but will have to run it over some heavy ground before final seat design to see how much actual movement there is in the rear swingarm. Worst comes to worst I turn it…
v3 Sketch surface update
Surfaces have been update for the xj600e. Using the sketchwork seen in a previous post CAS renders visualise the potential outcomes of using new riser bars instead of the Cafe racer clip-ons and how the change of design direction works in 3D with the current powertrain.
Sketches… v2 (out with the old)
More sketches… this time with a mince pie. It’s Christmas! Version 1 of the XJ600e used aesthetic features that would make it acceptable to the traditional rider. However, further research and dialogue with manufactures indicated that the new rapidly moving marketplace for 2020 preferred aesthetics that were more aggressive and ‘gadget-like’.
Rough ‘n’ sketchy…
Got bored so I started to sketch on top of the frame. Need to do more… Nice to scratch around in the photo though.
An electrifying life on two wheels... 